Notice: MediaWiki has been updated. Report any rough edges to marcan@marcan.st

Kinect 2

From OpenKinect
Revision as of 21:38, 30 December 2013 by Floe (talk | contribs) (Hardware)
Jump to: navigation, search

Hardware

Kinect 4 Windows 2 comes with a breakout box which basically converts from a custom power supply plug with 12V and 5V & a standard USB3 B-style socket to the proprietary Kinect connector.

PCB top view with Kinect socket + debug connector PCB top view with Kinect socket + debug connector

PCB bottom view PCB bottom view

Kinect socket with pin numbers Kinect socket with pin numbers

Pinout & Kinect cable wire colors (as per https://i.cloudup.com/gsEOYAqIDS.png):

1: 5V (from PSU), red 2: D+ (USB2), green 3: D- (USB2), white 4: GND 5: 12V (from PSU), brown 6: GND 7: GND 8: Unknown (probably debug signal), white/black

9: StdA_SSRX+ (USB3), orange 10: StdA_SSRX- (USB3), purple 11: GND 12: StdA_SSTX+ (USB3), yellow 13: StdA_SSTX- (USB3), blue

All grounds/shielding are connected internally.

USB Device

Protocol

Data