Notice: MediaWiki has been updated. Report any rough edges to marcan@marcan.st
Difference between revisions of "Kinect 2"
(→Hardware) |
Machineroom (talk | contribs) (→Hardware) |
||
(6 intermediate revisions by 3 users not shown) | |||
Line 2: | Line 2: | ||
= Hardware = | = Hardware = | ||
− | Kinect 4 Windows 2 comes with a breakout box which basically converts from a custom power supply plug with 12V and 5V & a standard USB3 B-style socket to the proprietary Kinect connector. | + | Kinect 4 Windows 2 comes with a breakout box which basically converts from a custom power supply plug with 12V and 5V & a standard USB3 B-style socket to the proprietary Kinect connector. Currently, it seems like the Kinect 4 Windows 2 itself is identical to the Kinect One from the Xbox, whose internals are already extensively covered at iFixit: http://www.ifixit.com/Teardown/Xbox+One+Kinect+Teardown/19725 |
[[File:k4w_breakout_top.jpg|600px|PCB top view with Kinect socket + debug connector]] | [[File:k4w_breakout_top.jpg|600px|PCB top view with Kinect socket + debug connector]] | ||
Line 13: | Line 13: | ||
Kinect socket with pin numbers | Kinect socket with pin numbers | ||
− | Pinout & Kinect cable wire colors (as per https://i.cloudup.com/gsEOYAqIDS.png): | + | Pinout & Kinect cable wire colors (as per https://i.cloudup.com/gsEOYAqIDS.png). Some cables use 2 shades of brown instead of red/brown for 5/12V: |
− | 1: 5V (from PSU), red | + | 1: 5V (from PSU), red (or light brown) |
2: D+ (USB2), green | 2: D+ (USB2), green | ||
Line 21: | Line 21: | ||
3: D- (USB2), white | 3: D- (USB2), white | ||
− | 4: GND | + | 4: GND, grey |
− | 5: 12V (from PSU), brown | + | 5: 12V (from PSU), brown (or dark brown) |
− | 6: GND | + | 6: GND, black |
− | 7: GND | + | 7: GND, black |
− | 8: Unknown (probably debug signal), white/black | + | 8: Unknown (probably debug signal), white/black -- goes together with pin 1 (5v) providing differential signaling; Leave it not connected |
9: StdA_SSRX+ (USB3), orange | 9: StdA_SSRX+ (USB3), orange |
Latest revision as of 14:48, 21 October 2021
Contents
Hardware
Kinect 4 Windows 2 comes with a breakout box which basically converts from a custom power supply plug with 12V and 5V & a standard USB3 B-style socket to the proprietary Kinect connector. Currently, it seems like the Kinect 4 Windows 2 itself is identical to the Kinect One from the Xbox, whose internals are already extensively covered at iFixit: http://www.ifixit.com/Teardown/Xbox+One+Kinect+Teardown/19725
PCB top view with Kinect socket + debug connector
Kinect socket with pin numbers
Pinout & Kinect cable wire colors (as per https://i.cloudup.com/gsEOYAqIDS.png). Some cables use 2 shades of brown instead of red/brown for 5/12V:
1: 5V (from PSU), red (or light brown)
2: D+ (USB2), green
3: D- (USB2), white
4: GND, grey
5: 12V (from PSU), brown (or dark brown)
6: GND, black
7: GND, black
8: Unknown (probably debug signal), white/black -- goes together with pin 1 (5v) providing differential signaling; Leave it not connected
9: StdA_SSRX+ (USB3), orange
10: StdA_SSRX- (USB3), purple
11: GND
12: StdA_SSTX+ (USB3), yellow
13: StdA_SSTX- (USB3), blue
All grounds/shielding are connected internally.