Notice: MediaWiki has been updated. Report any rough edges to marcan@marcan.st

Difference between revisions of "Kinect 2"

From OpenKinect
Jump to: navigation, search
(Hardware)
(Hardware)
Line 29: Line 29:
 
7: GND
 
7: GND
  
8: Unknown (probably debug signal), white/black  -- goes together with pin 1 (5v) providing differential signaling;  
+
8: Unknown (probably debug signal), white/black  -- goes together with pin 1 (5v) providing differential signaling; Leave it not connected
  
 
9: StdA_SSRX+ (USB3), orange
 
9: StdA_SSRX+ (USB3), orange

Revision as of 02:48, 3 August 2014

Hardware

Kinect 4 Windows 2 comes with a breakout box which basically converts from a custom power supply plug with 12V and 5V & a standard USB3 B-style socket to the proprietary Kinect connector. Currently, it seems like the Kinect 4 Windows 2 itself is identical to the Kinect One from the Xbox, whose internals are already extensively covered at iFixit: http://www.ifixit.com/Teardown/Xbox+One+Kinect+Teardown/19725

PCB top view with Kinect socket + debug connector PCB top view with Kinect socket + debug connector

PCB bottom view PCB bottom view

Kinect socket with pin numbers Kinect socket with pin numbers

Pinout & Kinect cable wire colors (as per https://i.cloudup.com/gsEOYAqIDS.png):

1: 5V (from PSU), red

2: D+ (USB2), green

3: D- (USB2), white

4: GND

5: 12V (from PSU), brown

6: GND

7: GND

8: Unknown (probably debug signal), white/black -- goes together with pin 1 (5v) providing differential signaling; Leave it not connected

9: StdA_SSRX+ (USB3), orange

10: StdA_SSRX- (USB3), purple

11: GND

12: StdA_SSTX+ (USB3), yellow

13: StdA_SSTX- (USB3), blue

All grounds/shielding are connected internally.

USB Device

Protocol

Data