Notice: MediaWiki has been updated. Report any rough edges to marcan@marcan.st
Difference between revisions of "Kinect 2"
(→Hardware) |
(→Hardware) |
||
| (8 intermediate revisions by 3 users not shown) | |||
| Line 2: | Line 2: | ||
= Hardware = | = Hardware = | ||
| − | Kinect 4 Windows 2 comes with a breakout box which basically converts from a custom power supply plug with 12V and 5V & a standard USB3 B-style socket to the proprietary Kinect connector. | + | Kinect 4 Windows 2 comes with a breakout box which basically converts from a custom power supply plug with 12V and 5V & a standard USB3 B-style socket to the proprietary Kinect connector. Currently, it seems like the Kinect 4 Windows 2 itself is identical to the Kinect One from the Xbox, whose internals are already extensively covered at iFixit: http://www.ifixit.com/Teardown/Xbox+One+Kinect+Teardown/19725 |
| − | [[File:k4w_breakout_top.jpg| | + | [[File:k4w_breakout_top.jpg|600px|PCB top view with Kinect socket + debug connector]] |
PCB top view with Kinect socket + debug connector | PCB top view with Kinect socket + debug connector | ||
| − | [[File:k4w_breakout_pcb.jpg| | + | [[File:k4w_breakout_pcb.jpg|600px|PCB bottom view]] |
PCB bottom view | PCB bottom view | ||
| − | [[File:k4w_breakout_socket.jpg| | + | [[File:k4w_breakout_socket.jpg|600px|Kinect socket with pin numbers]] |
Kinect socket with pin numbers | Kinect socket with pin numbers | ||
| − | Pinout: | + | Pinout & Kinect cable wire colors (as per https://i.cloudup.com/gsEOYAqIDS.png): |
| + | |||
| + | 1: 5V (from PSU), red | ||
| + | |||
| + | 2: D+ (USB2), green | ||
| + | |||
| + | 3: D- (USB2), white | ||
| + | |||
| + | 4: GND | ||
| + | |||
| + | 5: 12V (from PSU), brown | ||
| + | |||
| + | 6: GND | ||
| + | |||
| + | 7: GND | ||
| + | |||
| + | 8: Unknown (probably debug signal), white/black -- goes together with pin 1 (5v) providing differential signaling; Leave it not connected | ||
| + | |||
| + | 9: StdA_SSRX+ (USB3), orange | ||
| + | |||
| + | 10: StdA_SSRX- (USB3), purple | ||
| + | |||
| + | 11: GND | ||
| + | |||
| + | 12: StdA_SSTX+ (USB3), yellow | ||
| + | |||
| + | 13: StdA_SSTX- (USB3), blue | ||
| + | |||
| + | All grounds/shielding are connected internally. | ||
= USB Device = | = USB Device = | ||
= Protocol = | = Protocol = | ||
= Data = | = Data = | ||
Revision as of 03:48, 3 August 2014
Contents
Hardware
Kinect 4 Windows 2 comes with a breakout box which basically converts from a custom power supply plug with 12V and 5V & a standard USB3 B-style socket to the proprietary Kinect connector. Currently, it seems like the Kinect 4 Windows 2 itself is identical to the Kinect One from the Xbox, whose internals are already extensively covered at iFixit: http://www.ifixit.com/Teardown/Xbox+One+Kinect+Teardown/19725
PCB top view with Kinect socket + debug connector
PCB bottom view
Kinect socket with pin numbers
Pinout & Kinect cable wire colors (as per https://i.cloudup.com/gsEOYAqIDS.png):
1: 5V (from PSU), red
2: D+ (USB2), green
3: D- (USB2), white
4: GND
5: 12V (from PSU), brown
6: GND
7: GND
8: Unknown (probably debug signal), white/black -- goes together with pin 1 (5v) providing differential signaling; Leave it not connected
9: StdA_SSRX+ (USB3), orange
10: StdA_SSRX- (USB3), purple
11: GND
12: StdA_SSTX+ (USB3), yellow
13: StdA_SSTX- (USB3), blue
All grounds/shielding are connected internally.
