Notice: MediaWiki has been updated. Report any rough edges to marcan@marcan.st
Difference between revisions of "Kinect 2"
(→Hardware) |
(→Hardware) |
||
Line 13: | Line 13: | ||
Kinect socket with pin numbers | Kinect socket with pin numbers | ||
− | Pinout: | + | Pinout & Kinect cable wire colors (as per https://i.cloudup.com/gsEOYAqIDS.png): |
+ | |||
+ | 1: 5V (from PSU), red | ||
+ | 2: D+ (USB2), green | ||
+ | 3: D- (USB2), white | ||
+ | 4: GND | ||
+ | 5: 12V (from PSU), brown | ||
+ | 6: GND | ||
+ | 7: GND | ||
+ | 8: Unknown (probably debug signal), white/black | ||
+ | |||
+ | 9: StdA_SSRX+ (USB3), orange | ||
+ | 10: StdA_SSRX- (USB3), purple | ||
+ | 11: GND | ||
+ | 12: StdA_SSTX+ (USB3), yellow | ||
+ | 13: StdA_SSTX- (USB3), blue | ||
+ | |||
+ | All grounds/shielding are connected internally. | ||
= USB Device = | = USB Device = | ||
= Protocol = | = Protocol = | ||
= Data = | = Data = |
Revision as of 22:38, 30 December 2013
Contents
Hardware
Kinect 4 Windows 2 comes with a breakout box which basically converts from a custom power supply plug with 12V and 5V & a standard USB3 B-style socket to the proprietary Kinect connector.
PCB top view with Kinect socket + debug connector
Kinect socket with pin numbers
Pinout & Kinect cable wire colors (as per https://i.cloudup.com/gsEOYAqIDS.png):
1: 5V (from PSU), red 2: D+ (USB2), green 3: D- (USB2), white 4: GND 5: 12V (from PSU), brown 6: GND 7: GND 8: Unknown (probably debug signal), white/black
9: StdA_SSRX+ (USB3), orange 10: StdA_SSRX- (USB3), purple 11: GND 12: StdA_SSTX+ (USB3), yellow 13: StdA_SSTX- (USB3), blue
All grounds/shielding are connected internally.