Notice: MediaWiki has been updated. Report any rough edges to marcan@marcan.st

Difference between revisions of "Imaging Information"

From OpenKinect
Jump to: navigation, search
(Migrated content from github page)
 
(remove double header)
Line 1: Line 1:
= Imaging Information =
 
 
 
== RGB Camera ==
 
== RGB Camera ==
  

Revision as of 17:16, 17 November 2010

RGB Camera

The RGB camera has a slightly larger angle of view than the Depth camera

Depth Camera

Lots of information on calibrating the depth camera is available on the ROS kinect_node page

From their data, a basic first order approximation for converting the raw 11-bit disparity value to a depth value in centimeters is: 100/(-0.00307 * rawDisparity + 3.33). This approximation is approximately 10 cm off at 4 m away, and less than 2 cm off within 2.5 m. A more dense set of data and second or third order approximation could increase the accuracy maybe by an order of magnitude.

Once you have the distance using the measurement above A good approximation for converting (i, j, z) to (x,y,z) is: x = (i - w / 2) * (z + minDistance) * scaleFactor y = (j - h / 2) * (z + minDistance) * scaleFactor z = z

Where minDistance = -10 and scaleFactor = .0021. These values were found by hand.

To convert the 11-bit disparity value to an 8-bit grayscale value that is fairly linear with respect to distance: (2048 * 256) / (2048 - rawDisparity). Also, background noise can be effectively eliminated by ignoring rawDisparity values above 1023.