Notice: MediaWiki has been updated. Report any rough edges to marcan@marcan.st
Kinect 2: Difference between revisions
(initial page to gather all sorts of information on the new kinect) |
Machineroom (talk | contribs) |
||
| (14 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
= Hardware = | = Hardware = | ||
Kinect 4 Windows 2 comes with a breakout box which basically converts from a custom power supply plug with 12V and 5V & a standard USB3 B-style socket to the proprietary Kinect connector. Currently, it seems like the Kinect 4 Windows 2 itself is identical to the Kinect One from the Xbox, whose internals are already extensively covered at iFixit: http://www.ifixit.com/Teardown/Xbox+One+Kinect+Teardown/19725 | |||
[[File:k4w_breakout_top.jpg|600px|PCB top view with Kinect socket + debug connector]] | |||
PCB top view with Kinect socket + debug connector | |||
[[File:k4w_breakout_pcb.jpg|600px|PCB bottom view]] | |||
PCB bottom view | |||
[[File:k4w_breakout_socket.jpg|600px|Kinect socket with pin numbers]] | |||
Kinect socket with pin numbers | |||
Pinout & Kinect cable wire colors (as per https://i.cloudup.com/gsEOYAqIDS.png). Some cables use 2 shades of brown instead of red/brown for 5/12V: | |||
1: 5V (from PSU), red (or light brown) | |||
2: D+ (USB2), green | |||
3: D- (USB2), white | |||
4: GND, grey | |||
5: 12V (from PSU), brown (or dark brown) | |||
6: GND, black | |||
7: GND, black | |||
8: Unknown (probably debug signal), white/black -- goes together with pin 1 (5v) providing differential signaling; Leave it not connected | |||
9: StdA_SSRX+ (USB3), orange | |||
10: StdA_SSRX- (USB3), purple | |||
11: GND | |||
12: StdA_SSTX+ (USB3), yellow | |||
13: StdA_SSTX- (USB3), blue | |||
All grounds/shielding are connected internally. | |||
= USB Device = | = USB Device = | ||
= Protocol = | = Protocol = | ||
= Data = | = Data = | ||
Latest revision as of 12:48, 21 October 2021
Hardware
Kinect 4 Windows 2 comes with a breakout box which basically converts from a custom power supply plug with 12V and 5V & a standard USB3 B-style socket to the proprietary Kinect connector. Currently, it seems like the Kinect 4 Windows 2 itself is identical to the Kinect One from the Xbox, whose internals are already extensively covered at iFixit: http://www.ifixit.com/Teardown/Xbox+One+Kinect+Teardown/19725
PCB top view with Kinect socket + debug connector
PCB bottom view
Kinect socket with pin numbers
Pinout & Kinect cable wire colors (as per https://i.cloudup.com/gsEOYAqIDS.png). Some cables use 2 shades of brown instead of red/brown for 5/12V:
1: 5V (from PSU), red (or light brown)
2: D+ (USB2), green
3: D- (USB2), white
4: GND, grey
5: 12V (from PSU), brown (or dark brown)
6: GND, black
7: GND, black
8: Unknown (probably debug signal), white/black -- goes together with pin 1 (5v) providing differential signaling; Leave it not connected
9: StdA_SSRX+ (USB3), orange
10: StdA_SSRX- (USB3), purple
11: GND
12: StdA_SSTX+ (USB3), yellow
13: StdA_SSTX- (USB3), blue
All grounds/shielding are connected internally.
